4PROTECT Multinorm Warnschutz-Jacke Edmonton Leuchtgelb/Navy

fluorescent yellow/navy, water column: approx. 2,000 mm, breathability: approx. 800 g/m²/24h, EN 13688, EN 61482-2, EN 11612, EN 11611, EN 1149-5, EN 13034 type PB [6], EN 20471 and EN 343 certified. Windproof and waterproof design with Class 3 water vapour resistance, enabling an extended period of wear. Fire-retardant 3M™ reflective strips around the body and sleeves, as well as on the shoulders. Adjustable waist and hem, preformed sleeves for an optimal fit. YKK® double-layer front zip fastening, zip-off weatherproof hood with various adjustment options. 2 breast pockets and 2 large hip pockets, plus 1 Napoleon pocket beneath the front panel. Lining fitted with 1 breast pocket and 1 large pocket for a hood. Adjustable cuffs. Designed so that the flame-retardant MILTON fleece jacket (item 3541) can be zipped up inside. Service zip fastener for easy printing and embroidery. The certifying institute has approved printing in a maximum format of 100 x 150mm (chest) and 150 x 370mm (back) for two patch emblem products from various suppliers. We are happy to provide further information on request.

fluorescent yellow/navy, water column: approx. 2,000 mm, breathability: approx. 800 g/m²/24h, EN 13688, EN 61482-2, EN 11612, EN 11611, EN 1149-5, EN 13034 type PB [6], EN 20471 and EN 343 certified. Windproof and waterproof design with Class 3 water vapour resistance, enabling an extended period of wear. Fire-retardant 3M™ reflective strips around the body and sleeves, as well as on the shoulders. Adjustable waist and hem, preformed sleeves for an optimal fit. YKK® double-layer front zip fastening, zip-off weatherproof hood with various adjustment options. 2 breast pockets and 2 large hip pockets, plus 1 Napoleon pocket beneath the front panel. Lining fitted with 1 breast pocket and 1 large pocket for a hood. Adjustable cuffs. Designed so that the flame-retardant MILTON fleece jacket (item 3541) can be zipped up inside. Service zip fastener for easy printing and embroidery. The certifying institute has approved printing in a maximum format of 100 x 150mm (chest) and 150 x 370mm (back) for two patch emblem products from various suppliers. We are happy to provide further information on request.

MAIN FOCUS OF APPLICATION:

This clothing is NOT special fire protective clothing, as in the event of a fire, very high levels of heat can develop over an extended period of time. Instead, this clothing was specially developed for workers in an industrial setting to protect them from the consequences of the above-mentioned hazards. When using protective clothing against the thermal hazards of an electric arc as specified in EN 61482-1-2, it is important to note that this protective clothing is not electrical insulating protective clothing as described in standards such as EN 50286:1999, "Electrical insulating protective clothing for low-voltage installations". Complete personal protection also requires additional suitable protective gear such as a safety helmet/visor, protective gloves. In zone 0 areas subject to explosive hazards, and in the presence of highly explosive gases/vapours in the HC explosion group, a special operation-specific risk analysis must first be conducted before any work is performed. Impermeability to chemicals (penetration resistance) has been determined through the test media specified in the "Manufacturer's Information" (instructions for use) accompanying the product. The results are not applicable for other chemicals; additional appropriate tests must be conducted. Testing occurs under laboratory conditions and only serves as a guideline for practical application.

MATERIAL: Outer material: 60% Modacrylicic, 40% cotton Lining: 50% aramid, 50% viscose Reflective material: 3M Scotchlite 8935, flame-retardant

Herstellerinformation / Verantwortliche Person:

BIG Arbeitsschutz GmbH
Königsberger Str. 6
21244 Buchholz
Germany
info@big-arbeitsschutz.de